Display measurements for engine exhaust gas temperature (EGT)
Aerospace Blockset / Flight Instruments
The EGT Indicator block displays temperature measurements for engine exhaust gas temperature (EGT) in Celsius.
This block displays values using both:
A needle on a gauge. A major tick is (Maximum-Minimum)/1,000 degrees, a minor tick is (Maximum-Minimum)/200 degrees Celsius.
A numeric indicator. The operating range for the indicator goes from Minimum to Maximum degrees Celsius.
If the value of the signal is under Minimum, the needle displays 5 degrees under the Minimum value, the numeric display shows the Minimum value. If the value exceeds the Maximum value, the needle displays 5 degrees over the maximum tick, and the numeric displays the Maximum value.
To facilitate understanding and debugging your model, you can modify instrument block connections in your model during normal and accelerator mode simulations.
Connection— Connect to signal
Connect to signal for display, selected from list of signal names.
To view the data from a signal, select a signal in the model. The signal appears in the Connection table. Select the option button next to the signal you want to display. Click Apply to connect the signal.
The table has a row for the signal connected to the block. If there are no signals selected in the model, or the block is not connected to any signals, the table is empty.
Minimum— Minimum tick mark value
Minimum tick mark value, specified as a finite double, or scalar value, in ft/min.
The Minimum tick value must be less than the Minimum tick value.
|Block Parameter: |
|Values: double scalar|
Maximum— Maximum tick mark value
Specify the maximum tick mark value, specified as a finite double, or scalar value, in ft/min..
The Maximum tick value must be greater than the Maximum tick value.
|Values: double scalar|
Scale Colors— Ranges of color bands
Ranges of color bands on the outside of the scale, specified as a finite double, or scalar value. Specify the minimum and maximum color range to display on the gauge.
To add a new color, click
+. To remove a color, click
|Type: n-by-1 struct array|
|Values: struct array with elements
Label— Block label location
Block label, displayed at the top or bottom of the block, or hidden.
Show label at the top of the block.
Show label at the bottom of the block.
Do not show the label or instructional text when the block is not connected.
|Type: character vector|
This block is ignored for code generation.