Bluetooth Library: Simulate, analyze, and test Bluetooth systems in MATLAB

Overview

In this webinar, we introduce Communications Toolbox™ Library for the Bluetooth® Protocol. This Bluetooth library provides standard-compliant functions and reference examples for the design, modeling, simulation, and testing of Bluetooth communications systems. The library supports modeling all layers of the Bluetooth stack, link-level simulation, network simulation, test waveform generation, over-the-air testing, and golden reference verification.

With the examples and reference designs of the library you can:

  • Simulate and analyze BLE PHY layer, with waveform generation & visualization, signal recovery & analysis, end-to-end simulation
  • Model, simulate and analyze Bluetooth protocol stack and network layer, with BLE channel selection algorithms, BLE devices connection procedure, BLE network co-existence with WLAN interference, and applications such as Heart Rate Profile (HRP), with all layers of the stack
  • Work with over-the-air signals using Pluto SDR hardware, with BLE signal transmission & signal capture over a channel, and receiver operations to decode BLE signals

Highlights

  • Standard-compliant models for Bluetooth 5.0
  • Waveform generation and decoding
  • Signal processing functions, including channel coding, synchronization, channel estimation, and equalization
  • Link-level simulation with reference examples
  • Generate and decode protocol messages, including link layer, L2CAP, ATT, and GAP
  • Channel selection algorithms
  • Network modeling examples, including modeling of interference and co-existence
  • C and C++ code generation support

Please allow approximately 45 minutes to attend the presentation and Q&A session. We will be recording this webinar, so if you can't make it for the live broadcast, register and we will send you a link to watch it on-demand.

About the Presenter

Houman Zarrinkoub is a senior wireless product manager at MathWorks, based in Massachusetts, USA. During his 18 years of service at MathWorks, he has served as a development manager for multiple signal processing and communications software tools. He presently manages MathWorks products for modeling and simulation of 5G, WLAN and LTE technologies. Prior to MathWorks, he was a research scientist at Nortel Networks, where he contributed to multiple standardization projects for mobile and voice coding technologies. Houman is the author of the book Understanding LTE with MATLAB: From Mathematical Modeling to Simulation and Prototyping (Wiley, 2014). He holds a B.Sc. degree in electrical engineering from McGill University and M.Sc. and Ph.D. degrees in telecommunications from the Institut National de la Recherche Scientifique, in Canada.

Product Focus

Registration closed